Applied-engineering Vulcan Manuale Utente Scaricare il pdf (Pagina 19)

• ][ Plus Note: If the holes don’t align, try turning one

or both of the bottom plates around.

9) Plug Internal Power Cord Into Motherboard.

Return the computer to its normal position. The Vulcan’s

internal power cord plugs into the motherboard in the same

place as the old power supply’s cord. The connector’s push tabs

should be toward the left and right.

• Note: Do not force the connector; it will attach easily in

one direction.

Plug Internal Cord Into Motherboard

10)Set Switches According to Slot

The Controller Card will work from any slot. Before installing

the card, note the following:

◊ Do not install the card into the Memory Expansion slot.

◊ We recommend installing the controller card into slot 7.

The //e and ][ Plus will look for a boot source starting at

slot 7 and working down. If you want to boot from the

Vulcan, it will need to be in a higher slot than your

other drives.

◊ Check the switches on the card. The switch block is the

red rectangular box toward the bottom right of the card.

The switches should be set as shown below.

* Note: You’ll probably need to remove the tape covering

the switches.

12 Vulcan

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 61 62

Nessun commento

Applied-engineering Vulcan Manuale Utente Pagina 19